The perfect finishing touch. Varathane® Water-Based Clear Finishes are specifically developed to enhance the natural beauty of wood while providing protection. Water-based finishes maintain the colour of the wood, paint or stain, dry quickly, and clean up easily with soap and water. A crystal clear finish that never yellows, Varathane® Diamond Wood Finish® resists water, alcohol, and household chemicals, AND is low odour and environmentally friendly.

• Uses interpenetrating polymer network (IPN) technology to provide beautiful, transparent protection and much easier application
• This is a unique coating, a superior clear finish in every regard
• Should be used where a crystal clear finish is desired with maximum surface protection
• This coating protects, beautifies, and seals bare or stained woods and any surface finished with oil or latex paints
• It may be washed or cleaned repeatedly for easy inexpensive maintenance
• Fast dry, dry to handle (dust free) in one hour
• Crystal clear
• Non-yellowing
• Excellent adhesion and durability
• High resistance to abrasion and marring
• Superior durability and gloss retention
• Excellent flow properties to prevent brush marks
• Highly resistant to household chemicals, oils, and solvents
• Clean up with soap and water
• Approximate coverage: 400 sq. feet/gallon
• On bare wood 3-4 coats are recommended
• On previously finished surfaces, a minimum of 2 coats is advised DRY TIMES at 70 degrees F (21 degrees C)
• Dry to touch: 1 hour
• Dry hard: 2 hours
• Recoat: 2-3 hours