Bask in warmth and enjoy full peace of mind. Easy to install there's no need to disassemble for electrical connection or wall attachment. This baseboard convection heater installs right on the floor with back of unit in contact with wall. Perfect for renovations it is just the right size for old electric baseboard heater replacement. The heating element floats on high-temperature nylon supports to reduce thermal expansion noises and produce quieter natural convection heating. Note for sizing: The general rule of thumb for primary heat in most homes is 10 watts per square foot. For example, 10'x15'= 150 sq.ft. - 1500 watts.

• Finish: epoxy/polyester powder paint, may be repainted with any interior paint
• Voltage: 240V/208V, 1-phase
• Robust 22-gauge steel tight fit body
• Welded 20-gauge steel junction box
• Sturdy 20-gauge steel front panel
• Rounded upper corners and junction box sides
• Linear high-limit temperature control with automatic reset for added safety
• Stainless steel tubular heating element with aluminum fins
• Floating heating element on high-temperature nylon bushings eliminating expansion noises
• Aluminum diamond shaped element fins positioned for maximized heat transfer
• Small height and slim depth for economy of space
• Built-in thermostat kits can be installed at either end (sold separately)
• No disassembly installation with single-screw built-in rear entry wire holder
• Installation directly on the floor
• Connection box at both ends of the heater
• Two rows of oblong mounting holes with center mark for ease of installation
• Raceway and side knock-outs for baseboard interconnections

DIMENSIONS:

• 5-13/16" high x 2-9/16" deep x 66-1/8" long